Ƙarshen Mill Daga Kayan Aikin Wayleading

labarai

Ƙarshen Mill Daga Kayan Aikin Wayleading

An karshen niƙakayan aikin yankan ne da ake amfani da shi don sarrafa ƙarfe, da farko ana amfani da shi don yankan, ramuka, hakowa, da gamawa. Ana amfani da su da yawa don yanke kayan aikin ƙarfe zuwa sifofin da ake so daga tubalan da aka shirya ko don sassaƙawa da yankan saman saman ƙarfe.Ƙarshen niƙacim ma waɗannan ayyuka ta hanyar jujjuyawa da saka kayan aikin yadda ya kamata, yana ba da damar ingantaccen daidaito da inganci a cikin injinan ƙarfe.

Umarnin don amfani:
1.Zaɓi Mai KyauƘarshen Mill: Zaɓi maƙalar ƙarshen ƙarshen da ya dace bisa ga kayan aiki, sifa, da buƙatun machining na kayan aikin. Daban-daban na niƙa na ƙarshe suna da nau'ikan ruwan wukake daban-daban da geometries waɗanda suka dace da nau'ikan ayyukan injina daban-daban.
2. Aminta da Kayan Aiki: Kafin yin aikin, tabbatar da cewa kayan aikin yana da aminci a manne akan dandamalin injin don hana motsi ko girgiza yayin yanke.
3.Saita Ma'aunin Yanke: Saita sigogin yanke da suka dace, gami da saurin yanke, ƙimar ciyarwa, da zurfin yanke, dangane da kayan aiki da lissafi na kayan aikin.
4. Yi Yanke Ayyuka: Fara na'ura kuma sanya shikarshen niƙaa kan surface na workpiece. A hankali yi yankan ayyuka bisa ga ƙayyadaddun sigogi, tabbatar da tsari mai santsi da kwanciyar hankali.
5. Tsaftace Wurin Aiki: Bayan kammala aikin injiniya, tsaftace wurin aiki, cire kwakwalwan ƙarfe da tarkace da aka samar a lokacin yanke don tabbatar da aiki mai sauƙi don zaman machining na gaba.

 Kariya don Amfani:
1. Tsaro Na Farko: Lokacin amfani da wanikarshen niƙa, koyaushe suna sa kayan kariya na sirri, gami da gilashin aminci, toshe kunne, da safar hannu, don hana haɗari da rauni.
2.Kauce wa wuce gona da iri: Lokacinkarshen niƙaayyuka, kauce wa wuce kima yankan don hana lalacewa ga kayan aiki ko workpiece surface. Koyaushe kula da yanke sigogi don tabbatar da injina cikin iyakoki mai aminci.
3. Bincika Kayan Aiki akai-akai: Lokaci-lokaci bincika ƙarshen niƙa don kowane lalacewa ko lalacewa akan yankan gefuna. Sauya kayan aiki kamar yadda ya cancanta don kula da ingancin injina da inganci.
4.Hana Zazzaɓi: Guji zafi da zafikarshen niƙaa lokacin yin aiki ta hanyar daidaita sigogin yankewa da yin amfani da man shafawa mai sanyaya kamar yadda ya cancanta don rage yawan zafin jiki da kuma tsawaita rayuwar kayan aiki.
5. Ma'ajiyar da ta dace: Lokacin da ba a yi amfani da shi ba, adana kayan niƙa na ƙarshe a cikin busassun wuri mai iska mai kyau daga danshi da abubuwa masu lalata don hana tsatsa ko lalata a saman kayan aiki.


Lokacin aikawa: Mayu-02-2024